Create a Cute Halloween Goulie Wand

Hi!

I don't know about you but I am so ready for fall to begin!

Today I am really excited to show you how I created my first fall craft of the season. Let's get ready to make this easy, adorable, Halloween Goulie wand.

What you will need:
Creative Paperclay®
Styrofoam balls
Americana® multi-surface acrylic paint
Wooden round dowels
Dowel caps
Matte Mod podge 
Feather trim
Ribbon
Black Hemp string
Painters tape
Clay roller/tools
Raffia
Pencil 
Hot glue gun/glue
Paint brushes/water/paper towels

Lets get started:
1. Take a Styrofoam ball and a stick. Push the stick half way into your Styrofoam ball. Set stick aside.

2. Roll out your paperclay to about 1/4 inch thin.
3. Lay your Styrofoam ball on the clay and trim around the ball. Leave a little extra for wrapping around the ball.

4. Form the clay around the ball, removing any excess clay and making sure not to cover the hole.

5. Smooth the clay out with damp hands.
6.Let dry completely.
7. Paint 2 coats of white paint.
8. With a pencil , lightly hand draw out the face.
9. Paint in the face with black paint and a fine detail brush.
10. Seal it with a Matte mod podge.

Finishing Mr. Skeleton

The wand
Paint the stick white.
Use painters tape to create a striped effect.
Paint the space between the tape with black.
Paint the cap black and hot glue it on the stick.
Seal all with matte mod podge.

Glue the head on the other end of the stick with hot glue.

Creating the mini bat head.
Roll out a small ball of clay.
Flatten the ball with your finger.
Using a cutting tool, cut a triangle on the top of the circle.
Trim the other edges to create a bat head shape.
With damp fingers, smooth out the bat head.
When dry paint the face black and the eyes yellow.

The bow
Cut 3.5"of black ribbon and lay on the table.
Cut 8 strands of orange raffia various lengths and lay on top of the ribbon.
Cut a 5" piece of hemp string.
Pinch the ribbon and raffia together.
Wrap  the hemp string around them and tie it in a knot.
Tie the collar with the hemp string around the stick.
Hot glue in place and trim the ends.

Assemble 
Hot glue the bat head on the middle of the knot.
Cut 2"of feather trim.
Attach it around the back of the skeleton head, attaching to both sides of the back of the ribbon with hot glue.

My 4 yr. old grandson loved Mr. Skeleton! Because I had so much fun making him, I ended up creating a few more. Meet my monster and pumpkin Goulie wand.

I hope you enjoyed my first fall craft post. Come back later this month for a helpful tip that I use when creating with paperclay.

Happy Creating,
Shari
My Altered Life blog

The Imperfect Heart

 
 Hi,

Today I am showing a few mixed media techniques to make your creative paperclay piece pop.

I have heard that black wings symbolize imperfections. Showing that everyone makes mistakes and its okay to make mistakes.This was my inspiration for my mixed media piece "The Imperfect Heart"

The Supplies

Creative Paperclay®
5x7 canvas
Heart and wing mold
Sandits®
Cheese cloth
E-6000 glue
Water mister
Golden® matte medium
Tim holtz distress stain (wild honey, vintage photo, chipped sapphire, broken china)
Americana multi-surface satin paint (black tie, red barn)
Americana crystal gloss glitter paint (black)
Dylusions ink spray (post box red)
Pearlescent liquid acrylic (galactic blue)
Various sizes of paint brushes
Hair dryer 


Let's get started

Cut off a few small pieces of cheese clot.Spread a small amount of matte medium on the canvas, then lay the cheese cloth on top of it. Next add matte medium on top of the cheese cloth to secure it into place.

Dot  several colors of the distress stain on the canvas. 

Use a water mister and spray on the canvas. Pick up with canvas and tilt it in different directions to create a unique flowing look. 

While still wet you can spray on Dylusions and  Pearlescent liquid acrylic.  
Time saving tip:Use a hair dryer to dry your paints, stains and mediums in between steps.

I create the heart and wing piece from a candy mold.
Note: When using these kind of molds with your paperclay be sure that the clay does not spill out over the edges of the mold. Let it dry some before you try and remove it from the mold.

Clean up the dried paperclay mold using Sandits®.
These are the best products that I have found to clean up small detailed areas of your paper clay.

Finally paint your piece using the Americana multi surface and crystal gloss glitter paint. Attach it to the canvas using E-6000 glue.

I am so glad you decided to stop by and take a peek at my tutorial.  

Shari

I have been creating art for as long as I can remember. I studied graphic design in Portland, Oregon before moving to Denton, Texas and putting all my focus on creating mixed media art. In addition to being on the Creative Paperclay design team, I am a contributor for the Robin's Nest Design Team, an article writer for Mixed Media Art, and a blogger and outside artist for DecoArt.

I strongly believe in giving back. I volunteer at Scrap Denton Creative Reuse Center where I teach workshops, art camps, and perform art demos. I am very passionate about mixed media art and enjoy helping and watching others discover their creativity.

Our Special Fairy Garden

Hi!

Today I wanted to share a fairy garden that my grandson and I created with a little help from Creative Paperclay®

He picked out some fairy garden items at the store, but I wanted to make it an extra special experience by creating some of our own. We had so much fun!

We created stepping stones, a pond with fish in it, some mushrooms, and flowers with faces.

Let me show you how we created the pond

I used wire mesh to create a curved shape and added paperclay to it. I rolled a tube of paperclay, cutting pieces to create the bricks on the edge of the pond.

I painted it using Americana multi-surface paint. My grandson added sticker fish and I covered them with glossy accents to make it appear they were under water. Note: The glossy accents will be cloudy when you first pour it but will be clear once it dries.

 

This is how we created the mushrooms

My grandson took a piece of paperclay and rolled it into a ball. He took another piece and rolled it into what would look like a tootsie roll. I took over and formed the ball into the mushroom cap and the roll into the stem.

When dry, glue the cap to the stem and paint.

 

Lets make the stepping stones

My grandson made several small balls and flattened each of them with his palm. I helped to smooth the edges. When dry he painted both sides.

Creating the flower faces

I have a silicon form that has several sizes of faces. I chose the smallest size and painted them.

I picked up some small flowers at the craft store and glued the faces to the centers of the flowers.

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 Here are some more pictures of our fairy garden.

 

 

 

 

This was such a special day of fun and creativity for my grandson and I. 

 

Like most boys, this fairy garden adventures involved large bugs attacking and magical gnomes coming to the rescue!   

 

Thanks you for stopping by! I hope this has inspired you to create some special memories with the little ones in your life using Creative Paperclay®

Shari

I have been creating art for as long as I can remember. I studied graphic design in Portland, Oregon before moving to Denton, Texas and putting all my focus on creating mixed media art. In addition to being on the Creative Paperclay design team, I am a contributor for the Robin's Nest Design Team, an article writer for Mixed Media Art, and a blogger for DecoArt.

I strongly believe in giving back. I volunteer at Scrap Denton Creative Reuse Center where I teach workshops, art camps, and perform art demos. I am very passionate about mixed media art and enjoy helping and watching others discover their creativity.

Alice Inspired Pin Cushion for Mom

 Good Morning!

If you have a Mom who likes to sew then this cute teacup pin cushion gift will be a real winner!

It doesn't matter how old you are, mom will always cherish something handmade by you. She still has a shoebox full of magnificent drawings you created in elementary school .... am I right?

Here is what you will need

Creative Paperclay®
Sandpaper
Sandits®
Styrofoam ball
Poly fiberfill
Fabric
Plastic flowerpot
Baking spray
Sewing pins
Needle and thread
Americana Muti-surface paint®
Mod Podge®
 E6000 glue

Let's get started

Making the cup
1. Lightly spray a plastic flower pot with baking spray so that your paperclay will not stick.
2. Roll out a sheet of paperclay and drape over the flower pot.
3. Trim off excess.
4. Smooth out paperclay using water on your fingertips
5. Cut a strip of paperclay and roll it to form a solid tube. (This will be for your handle)
6. When dry smooth out the cup more (if needed) using a fine grit sandpaper. The handle had a lot of  curves. I found it was easier to finish using Sandits®.
7. Paint your pieces and decorate to your liking.
8. Attach the handle to the cup using E6000 glue.
9. Mod Podge the entire piece to seal.

Making the pin cushion 
1.Cut a square piece of fabric large enough to wrap around your ball.
2.Wrap some fiberfill around the styrofoam ball.
3.Wrap your fabric around the ball to hold the fiberfill on pinning in place.
4. Take a needle and thread and stitch together at the bottom of the ball gathering excess as you go.
5. Remove the pins.
6. Glue the finished fabric covered ball into the cup using E6000 glue.

Top view of the finished pin cushion

Thanks for following along with the creation of my quirky Alice in Wonderland inspired pin cushion.

Happy creating!
Shari

I have been creating art for as long as I can remember. I studied graphic design in Portland, Oregon before moving to Denton, Texas and putting all my focus on creating mixed media art. In addition to being on the Creative Paperclay design team, I am a contributor for the Robin's Nest Design Team, an article writer for Mixed Media Art, and a blogger for DecoArt.

I strongly believe in giving back. I volunteer at Scrap Denton Creative Reuse Center where I teach workshops, art camps, and perform art demos. I am very passionate about mixed media art and enjoy helping and watching others discover their creativity.

Follow more of my creative journey on My Altered Life's blog and My Altered Life on FB

Sixty-Eight Days Till Spring!

Hi!
This is my first project as a designer for Creative Paperclay®.  I am looking forward to showing you all the fun projects you can make with Paperclay, along with some tricks and techniques that will help your creativity soar!

I am so ready for spring to come! 

 Here is a little bit of early spring that I created for my studio.

Supplies

Creative Paperclay® modeling material
Delight™ air dry modeling compound
Acrylic paint pen (white, purple, black)
American multi-surface paint (iris, cerulean blue, cobalt teal, sprout green, ebony)
Gesso
Re-purposed tissue covered foam ball
Re-used Fabric covered cardboard bird
Thin cardboard or cardstock for bow
Dowel
Sm clay pot
Florist foam
Yellow glass head pins
Punched paper flowers
22 gauge cloth stem wire
Excelsior (chestnut brown) 
Weld bond glue
Hot glue

Let's get started

I started out painting my clay pot and dowel and set them aside to dry.

 

  Next I detached the wings of the bird. I covered the body with Creative Paperclay® in small sections smoothing with water along the way. I did the same with the wings. I set them aside to dry. When they were both completely dry I attached the wings using Creative Paperclay®.To do this I used a little water on the bird and the wing, added small amounts of the clay on the inside and outside smoothing the wing and body together. Set aside and dry. 

When dry you can smooth even more by sanding with a fine sanding paper. Paint with Gesso. When dry paint your little birdie with your favorite colors.

 To create the bow I cut a thin piece of cardboard in a rectangular shape. I folded it in half width way, and cut out a cat eye shape.  Open it up,take the two outside points, bring them to the center and glue in place. Roll out a rectangular shape of Delight™ air dry modeling compound and cover the outside. Trim off excess. Add small pieces on the inside to cover, smoothing with water as you go. Roll and cut out 2 shapes for the bow ribbon and add to the back of the bow. Roll a cylinder shape for the bow middle and attach in back as well. Let dry and then paint.

 I used Delight™ for the bow because I wanted a really lightweight piece to add to my dowel.

 

I worked on the styrofoam ball next. Since it was already decorated with the tissue paper all that was needed was to punch out little flowers with a paper punch and attach them with yellow glass head pins.

For the first bird leg I used 3 pieces of 22 gauge cloth stem wire and twisted them together. I punched a hole in the bottom of the bird and shoved the wire into the hole. I used Weldbond glue to secure it. The second leg I used 4 pieces but left one piece longer for pushing into the ball. 

I assembled it all by punching a small hole in the bottom of the ball, forcing the dowel in the hole,  filling the clay pot with florist foam, pushing the assemblage into the foam, adding excelsior around the top of the foam, hot gluing the bow on, adding the bluebird on top with Weldbond.

 Thank you for checking out my first project! I hope it inspires you to create a little spring for your favorite spot using Creative Paperclay®.

Shari

Follow My Altered Life's blog page

My Altered Life's Pinterest addiction

Tweet with My Altered Life

My Altered Life is on FB