Altered Altoid Tin with Creative Paperclay® Figures

I'm having great fun altering tins—sardine cans, Altoid tins, etc. Creative Paperclay® is perfect for making the figurines that I include in them.

To begin I used pliers to gently open the hinges so I could remove the lid. Next, I spray painted the outsides of both the lid and bottom of the tin.

While the paint was drying, I created the snowman and tree using Creative Paperclay. The snowman is two small balls of clay with a wire support holding the head and body together.

Beginnings of a snowman

Wire support between head and body

To make the snowman's smile I cut away part of a soda straw, leaving just the right sized curve to press into the damp clay to leave the impression of a smile.

His hat was made in two pieces—a small flat circle and an egg-shaped pieces that I scored for the crease in the top of the hat. Looks a bit like a coffee bean, doesn't it? I attached the hat after is was dry and painted.

.

The tree was made by forming a cone of clay. Then, starting at the top of the cone and working round and round, use the tips of a pair of small, sharp scissors to make a series of snips. Gently lift these "branches" to form the tree.

Cone for tree

Newly formed tree

While the clay pieces were drying, I coated the inside of the lid and bottom of  the tin with Duo Adhesive and mica flakes. On the inside of the lid and outside cover of the tin, I added Christmas prints using double-sided adhesive along with embellishments. I cut the lamppost that is behind the snowman on my Zing electronic cutter.

Cover of the altered tin

Lamppost

Here's a close up of the snowman and tree—already for a Christmas display.

Carole

It's Beginning To Look A Lot Like Christmas...Crafting!

I awoke this morning with a start!  I am an Art teacher 3 days a week and it suddenly hit me that I have only 3 weeks MAX to start to finish Christmas projects with each of my classes (K-8th grade).  I know how much the kids like working of any sort, so I pulled out my Creative PaperClay to experiment.  The project is super easy and the results eye catching.  Let's get started.

Materials:
1 package Creative PaperClay
rolling pin or acrylic roller (or pasta machine set to thickest setting)
mesh baggie
bamboo skewer
star cutter set (shown: Ateco)
wooden spool beads (Indus Trading Co.)
small clay pot
Optional:  paint, glitter, glue

Procedure:
1) Remove clay from package.  Flatten with chosen tool (rolling pin, acrylic roller, or pasta machine).  Place flattened clay on work surface.
2)  Use cutters to cut 2 of each size except for the smallest...cut only 1 of that size.  Use a finger to smooth the edges of each star.

3)  Lay mesh baggie over each star and press.

Mesh will leave behind an interesting texture.

4)  Lightly stack the stars beginning with the largest and finishing with the next to smallest.

Press the end of bamboo skewer into the center to create a hole in each layer.  Remove skewer and unstack stars to dry.  Place smallest star on the pointed end of the skewer to dry.

NOTE:  Stars can dry overnight or (for those of you who know me well) placed into a 275 degree oven for about 30 minutes.
5)  Once dry (or cooled), glue the small star to pointed end of bamboo skewer.  Then add stars 2 at a time, sliding a wooden spool in between sizes.  Continue until all of the stars have been placed on skewer.  Add one last wooden spool.
6)  Press any remaining clay from the package into the clay pot.

Turn clay pot upsidedown.  Press skewer with tree through hole in top.

OPTIONAL TOUCH #1:  Paint tree and spools as desired.  Pot can be decorated with paint, permenant marker, or ribbon trim.

OPTIONAL TOUCH #2:  Drill small holes at the tips of each star and hang small ornaments (must be lightweight).  Display your tree on top of a mirror in the center of a table...GOR-GE-OUS!

For my students I think that I will adapt the tutorial to use smaller staggered stars and string on pipe cleaners instead of the bamboo skewer.  It will help the clay to go a bit farther in my classroom (up to 36 students per class) and leave me counter space for other projects :-)

Think outside the ... cookie? A Creative Paperclay® Inspired Cookie Tree

Hi Everyone and Merry Christmas to you!

I hope you are all ready for the holidays.  Most of us are busy shopping, cleaning, doing last minute decorating, and of course, making cookies.  At this time of year, I always reminisce a little about my dear, sweet Grandmother who has long since pasted.  As a child, I would help my Grandmother make tons of holiday cookies.  Rolling out dough and using cookie cutters was my favorite.  This tutorial is just that, but with Creative Paperclay® instead.  It was really fun and there are so many variations to it.  I hope that you create some wonderful memories with your kids / grandchildren and try it out.  I will be making a Creative Paperclay® inspired cookie tree.  Are you ready?!!

I am sure some of you have see this item before.  It has various sized star cookie cutters in it and you can stack up your cookies to make a Christmas tree.  I bought this set some time ago, thinking that I would make cookies and do this, but alas, it sat unused for a few years.  So, this year I brought it out and thought what about paperclay?  

Why not give it a try?  So let's get started!   Here are the supplies you need, however, you can always omit some and use others.  The world is YOUR laboratory ... venture out and modify if you want.  

Various sized cookie cutter stars

Creative Paperclay®

Rolling Pin

Various Decorative Stamps

Baby Powder

Baking sheet, tin foil and toothpick

Rubber Scrubbers / Sand Paper

Paint 

Gel Stain / towel

Matte Varnish

Paint Brushes

Modge Podge

Glitter

Distress Ink / Cotton balls

Spray Adhesive

Christmas Paper & 2' block of wood

Wire

E6000 Glue

Let's start by prepping out our work space.  You can see that I have my silicone mat out and have sprinkled it with some baby powder.  Baby powder works like flour would to cookie dough.  It really works great on Creative Paperclay®!  Sprinkle a little on your counter and roll out your paperclay.

Looking good so far!!  Keep rolling!  I rolled my clay out to about 1/4" thick.

Next, find a cute stamp and stamp your clay.  This one has all sorts of holiday words on it.

IMPORTANT:  Since the cookie cutter set has 6 different sizes.  I needed to figure out how many of each size I was going to cut out for the tree.  This is what I came up with.

#1 --- Star on top of tree (smallest star) --- Cut out 2 - (no stamp imprint)
#2 --- Next size up --- Cut out 2   (Stamp both with same stamp imprint)
#3 --- Next size up again --- cut out 3 (stamp two with one stamp imprint and one with a different one)
#4 --- Next size up again --- cut out 3 (stamp two with one stamp imprint and one with a different one)
#5 --- Next to largest --- cut out 3 (stamp two with one stamp imprint and one with a different one)
#6 --- Largest size --- cut out 4 (stamp two with one stamp imprint and the other two with a different one)

This is the largest cookie cutter in the set.  Cut out four of these guys.  I used two different stamps on this size.  I did, two stars with the holiday word stamp and two stars with a polka dot stamp below.

Here's a tip ... If you wet your finger and go around the outside of the star smoothing down the rough edges before they are dry, sanding will be a whole lot easier.  Once you cut out your stars, place them on a cookie sheet lined with foil.

Here are my largest stars.  Two with polka dots and two with holiday words stamped on them.  Let's put these babies in the oven at 250 degrees for about an hour or until they are completely dry.  Make sure after 15 minutes, you flip them over.  They will want to curl up.  Turn them over every 15 minutes to keep them as flat as possible.

If you don't want to make a cookie tree and want to make ornaments, now is the time to poke some holes in the tops of your stars. I think these would look great as ornaments - just string a ribbon through them.  If you have letter stamps - stamps your family's names into the clay.  So easy and the kids will have so much fun trying out all your cookie cutters shapes!

Here you can see the rest of the stars in various sizes.  I tried to vary the pattern stamped on the stars.  Since we will be layering the stars, I wanted each layer to look different.  

You will notice that two stars in the upper left hand corner, have holes in them.  You will want to do this too.  These are the stars that are the next size down from the smallest star.  Poke a hole right in the middle of each one -- there should be two.  Make sure the hole goes all the way through.  These two stars will hold the top star of the tree.  Let's make that now.

To make the star on top of the tree, cut out two of the tiniest stars and glue them together with water.  Use the water to smooth out the seam line.

Next get a toothpick and poke a hole in the bottom.  Keep the toothpick in while baking the star.  Wouldn't these make cute magic wands.  Hmmm ... something else to try!

Bake these stars again at 250 degrees until completely dry.  Don't forget to turn them over every 15 minutes to avoid curling up.

Once the stars are dry and have cooled down.  Now, it's time to sand them.  The star on the left is sanded, the star on the right is not.  There is a big difference as to the rough edges vs smooth.  Sanding just gives your piece a clean, professional look.  Plus, I love to sand!

I use these little sanding pads called Rubber Scrubbers.  They are heaven!!  No harsh sand paper on my skin!  Love these!  I spoke of these in my last tip on this blog.  Check it out!  See how nice they bend to conform to what I am sanding on.  Sand the edges and underside.  Lightly sand the tops because you would hate to lose your pretty stamping.

Here the stars are sanded and ready to paint!  Let's get going!

I am using a medium green paint.  However, you can paint your stars whatever color you like!

Next, I am going to dry-brush in some lighter green to give these stars some highlights.  Looking good!  When all the stars are painted and dry, I will stain them. 

Don't forget to paint your top star.  I've decided to paint mine in a barn red.  I have removed the toothpick and will replace it with a piece of wire later.

Here I am using a gel stain to give these stars some texture.  The stain will sink into the nooks and crannies of  the stamping and really show it off.  Wear gloves to do this.  Apply the stain and then rub it off with a scrap piece of towel.  When all the stars are stained, let this dry completely.  The gel stain will be a little sticky when it is dry, but we will fix that later. 

Next, let's make the base for this tree.  Here is a 2" block of wood that I will be using.  The paper under it is what I will use to decorate the block with.

Turn your paper over and outline the size of the block.  You will need to do this six times as the block has that many sides.  Then cut them out.

Use spray adhesive to attach your paper to your block.  Spray the backside of your paper and stick it to the block's surface.

Once the spray adhesive has dried, get out your stamp pad ink and darken the edges of your block.  I am using a cotton ball to dab into the ink and rub on the corners of the block.  This hides the paper edges and looks really cool.  I am using Distress Ink - the color is vintage photo.  When your ink has dried completely, use some modge podge in matte and give the entire block a good coat of it to seal the paper.  Let dry.

Now that the gel stain is dry on all the stars, it is time to seal the them with matte varnish and add a little glitz to them. In the picture above I am holding a tiny jar of pearl-ex powder in the color interference green.  These powders, when added to varnish, give your piece an iridescent look and shimmer.

But before we add the varnish, now it is time to kinda get a feel for how our tree will be stacked.  Before you varnish the stars, do a trial run on stacking.  I want to stack each star with a different stamp pattern.  For example, you have four large stars with two different patterns.  Vary the patterns when stacking.   I also do not want to glitter each star, so I want to vary that too.  I will varnish a star with plain matte varnish and then the next star to sit on top of it, varnish adding pearl-ex and glitter to it.

I am applying a mixture of matte varnish and pearl-ex powder to every other star as I am doing my trial run to stacking.  The stars with pearl-ex in them will be glittered.  When the varnish and pearl-ex is wet on the star, sprinkle with a little glitter and let dry.

We are almost done!  Let's start stacking.  I am using E6000 glue to adhere everything together.  Put some glue on the top of your block.

Start stacking and staggering your stars.  Just add a dab of glue in the center of each star and press down the next star into in.  You can see how pretty the color variations are some stars with pearl-ex & glitter and some without.  The patterns are beautiful!

Make sure when stacking that you are center over your block.  Your tree might start leaning.  Straighten it out and keep staggering the stars.  In the above picture, I am at the top where the two stars with the hole in them will go.  Put some glue into the hole and add a small piece of wire in the first star.  Put some glue around the wire and then string your second star through the wire and press firmly down to secure.

Lastly, place the sweet star on top.  Put some glue in the hole of the star and press the star down on the wire.  YAY!!  We're done!

So darling!  You could even add tiny beads to it to give it more bling or maybe add some snow texturing.  Hope you had fun!  

I wish you all a very Merry Christmas and all the Best in 2014!  If you have some time, please stop by my blog at www.charmedconfections.com and say hello.  If you have any questions about this tutorial, please feel free to leave a comment and I will get back to you.  Thanks again and have the happiest of holidays!  LeeAnn