Simply Hearts Magnetic Photo Frame

 My February project from last year was a photo holder, and this year I'm making another one.  This one is a simple project that kids can work on too!



To create your own, you will need:

Delight™ air dry modeling compound
metal cookie sheet
magnetic tape or strips
pencil
paper
plastic wrap
acrylic paint in your choice of colors
acrylic varnish
masking tape
scissors
ruler
photo
plastic baggies
craft knife
*optional - heart-shaped cookie cutters
















After choosing the photo you'd like to use, place it on the paper and trace around it,  Add a 1/8" to 1/4" line inside the tracing on each side.  This will be used as a guideline for your frame.
When you've finished making the pattern, tape the paper to the back of the cookie sheet and cover it with plastic wrap.  Tape the plastic wrap in place as well.

 Now cut the magnetic strips to fit around the outside edge of the frame and lay that in place.  It doesn't have to be exact (my daughter is making one of these with me, and hers is the very neatly done one on the right)

Cover the magnetic strips with a layer of modeling compound.  We just pushed ours all around it, but you could also roll it into strips and lay it over the top.

Color some of the clay with acrylic paint by putting the clay and paint into a baggie and squishing both together until they are combined.  Start with just a few drops of paint, then add more to get to the desired color.

Now press or roll out the colored clay, and use cookie cutters, your own heart shaped pattern, or just freestyle cutting to create heart shaped pieces of various sizes.  Add these to the frame as desired.

Continue layering heart shapes until you are satisfied with your design.  Set the frame aside to dry.

When the frame is dry, carefully peel it from the cookie sheet.  Use scissors to trim any ragged edges or areas you want to change.  I rounded the corners of my frame and trimmed the little bits of clay off from where I had pushed it onto the cookie sheet.

Varnish with desired finish and you're done!  Put your photo behind it and stick it to the fridge or other magnetic surface, and enjoy looking at your loved ones!

Thanks for joining me here again this month!

I'd love for you to join me for more projects & art adventures on my personal blog

Find me on Facebook, or peruse & ponder pics with me on Pinterest

Conversation Hearts Photo Holder by Tori West

I have been having a lot of fun learning about Delight^TM  Air Dry Modeling Compound!  One of the things I like about it so far, is that when mixed with acrylic paint it retains the color in pretty much the same intensity when dry, as it had when wet.  While trying my paint experiments I came up with a lovely shade of pink, which reminded me of the candy conversation hearts in the stores this time of year.  For Valentine's Day I decided to make larger versions of these sweets and turn them into a photo holder  (this one holds a photo of my husband and I about to go on a romantic Valentine's Day carriage ride in Seattle!)  The "secret" to the assembly staying in place is it's weighted base.

For this project you will need:

Delight^TM  Air Dry Modeling Compound

acrylic paint - I used Delta Ceramcoat "Hydrangea Pink" and "Bright Red"

matte varnish

craft wire - 18ga. red

emery board or sandpaper

hot glue gun and glue sticks

pliers

wire cutters

masking tape

craft knife

cutting mat

corrugated cardboard

20-30 stainless steel washers

tracing paper

letter pattern

rolling pin

strips of wood or dough bands in 1/4" and 1/2" thicknesses

plastic wrap

pencil

soft lead colored pencil (Prismacolor "Process Red" or similar)

optional: ribbons, colored card stock or paper, specialty scissors

Start by cutting two heart shapes from corrugated cardboard - if you are using my pattern, note that the heart on top is slightly smaller than the one on the bottom.  The dotted lines to the inside of the hearts are the ones to use for cutting the cardboard pieces.

Use the hot glue gun to attach washers to both sides of the heart you will be using for the bottom.  Add an extra row or two of washers to the lower portion on each side, until your heart will stand in place on it's own.

While that is cooling down, mix about 1/2 package of clay with paint - for this candy pink color I used 4 drops bright red & 8 drops hydrangea pink.

Roll the clay out to a thickness of 1/4".  Place your weighted heart piece on the clay and cut out around it, leaving about 1/8" all the way around to fold over the edge.

 Repeat the process for the other side, then press and smooth the clay around to cover the edges of the heart.  Roll the clay out again, this time to a 1/2" thickness, and cover the second cardboard heart, making it the same thickness as the first.  Set these aside to dry.

If you have extra clay mixture store it in an airtight container.  When the hearts are dry, sand and do any additional smoothing or shaping necessary, use the saved clay if you need to make any changes or fill any gaps.

Apply masking tape to your pliers to avoid scratching the craft wire.  Using an emery board or sandpaper, file the end of the wire on the spool just enough so that it isn't sharp (to prevent scratches to your photos and yourself!).  Starting with the curl in the center of the wire heart shape, bend wire in double-heart and then straight down as shown, then clip to length.  Don't file this end down, the point will help poke the wire through the hearts & cardboard.

Lay hearts down on pattern sheet, then guide wire into position through the center (you're aiming for the cardboard section) hold the wire close to the heart and push a little bit at a time to poke through the corrugated sections.  Don't push the end point all the way through the bottom heart.

Trace lettering in reverse onto tracing paper.  Turn the tracing over and position on hearts, then, holding the pattern in place, transfer by going over the letters lightly with pencil.  Don't push so hard that you indent the clay surface.  (the straight lines on the letters above indicate the width I want them to be.  Tracing the center line and width is much easier and more accurate than tracing and transferring the whole outline of each letter)  The transferred pattern will be very light, but make sure you can see it before moving the tracing paper.

Now color and fill out the lettering with light, short strokes of the colored pencil.  Apply matte varnish to seal the pencil and clay.

Add ribbon and decorations as desired.  Since my photo had a primarily blue over all tone, I layered it with a piece of red card stock and scalloped white paper.

Thanks for joining me here again, and have a very Happy Valentine's Day!

I'd love for you to join me for more projects & art adventures on my personal blog

Find me on Facebook, or peruse & ponder pics with me on Pinterest

Connect on Google+ or see what new creations I may have on Etsy