How to Create a Unique Wall Piece

 

Hello everyone! My name is Cinnamon Willis and I am going to show you how I created this cute wall piece!

Supplies:

Gloves
Drill with small bits
Copper acrylic paint
Drop cloth or someplace to work on that can support a mess
Creative Paperclay®
Water
Sanding paper

Roll and flatten out your clay. I used a lid to a container to flatten and then cut a disc out like you would with a cookie cutter.

When you get the shape just right, take your disc and set it aside to dry. Monitor the drying to make sure that the disc doesn't warp upwards. You might want to set a book on top of the clay with a piece of parchment paper in between.

When the piece dries, take your drill and drill the a hole in the top of the disk.

The nice thing about paperclay is that you can draw directly on it like paper. Draw the design that you would like to have on your piece. 

Just like with paper, you can erase your drawings with a eraser. You can go back and forth with your design until you are happy with it.

Paint your piece with any type of acrylic paints that you would like to use. I choose to put gold on the side of my piece.

Use a protective coating to seal your piece. This is how it turned out.

Thank you all once again for stopping by, and I hope that you enjoyed today's tutorial! You can find Creative Paperclay® at the following retailers Creative Paperclay® Online Store, Michael's, Amazon, Joann's.

See more of my work at Melandolly.com, catch updates on 

my Instagram page and here is a link to my shop!

How to Make a Steampunk Character

Hello everyone! My name is Cinnamon Willis and I am going to show you how I created this cute steampunk sculpture!

Supplies:

Gloves
Mask
Drill with small bits
Copper acrylic paint
Drop cloth or someplace to work on that can support a mess
Small wood circle
Bronze gears and key
Creative Paperclay®
Water
Sanding paper

First start off with getting your materials in order. Cover your work area with a drop cloth (I have a board that I work on instead), gloves,

Get a small drill bit and drill two holes into your wood disk for the feet of your sculpture. Make sure the bit is the same size as the wire so that it fits in snugly.

Begin to make your armature out of the wire. Check to make sure the wire sits snug in the holes that you drilled.

Continue making the armature to how you would like your figure to look. When you are done with the shape, use masking tape to cover the parts that you want to cover with clay. Begin putting the clay on top of the masking tape. Continue building up the sculpture and set it aside to dry before beginning another layer. 

Here I made little nubby hands and a square head.

Sand down the pieces that you would like to get nice and smooth.

Paint the piece black so that you can cover it with the bronze or gold if you like. The coat of black paint makes the metal paint look more like a piece of metal.

Here is a coating of bronze paint that was put on top of the black. Streak the metallic on top of the black sporadically so that it isn't so uniform.

Start getting your gears and key ready to be placed on the piece. Use e6000 glue to put the pieces on the figure and use a small string of wire to hook the key on with to hang from the figure's hand.

Use a protective coating to seal your figure. This is how he turned out.

Thank you all once again for stopping by, and I hope that you enjoyed today's tutorial! You can find Creative Paperclay® at the following retailers Creative Paperclay® Online Store, Michael's, Amazon, Joann's.

See more of my work at Melandolly.com, catch updates on 

my Instagram page and here is a link to my shop!

Little Teapot

Hi there, I'm Susie and I'm spilling the tea on how to create your own little teapot out of a recycled jar. I create monthly tutorials for as a Creative Paperclay® Design Team Member. They are meant to a simple building block for a creative to add their own ideas. So have fun with it. I do keep my videos short, because if you're like me, I like to get to the main idea and get busy creating on my own.

View the photos and then click on the video

Some supplies you'll need to gather:

Small Jar (I used a rounded little honey jar) Masking tape aluminum foil air dry clay (I use Creative Paperclay® water clay tools lace or your choice of item to create textures in the clay flower, insect and leaf molds if desired sand paper (fine grit) acrylic paints paint brushes Water based sealant (I used krylon spray clear matte finish)

You can find more tutorials from other design team members on the Creative Paperclay® blog. http://creativepaperclay.blogspot.com/ You can find my work at: www. ArtbysusieK.com @Artbysusiek on IG, FB and TikTok @WillowHollowWoods on IG and FB

email ArtbySusieK@gmail.com

How to Create a Cache Pot with Paperclay Embelishments

Hello everyone! My name is Cinnamon Willis and I am going to show you how I created this cache pot for my small hoya plant!

Supplies:

Plaster of Paris
2 Plastic quart containers
Plastic drinking cup
Gloves
Mask
Drop cloth or someplace to work on that can support a mess
Wood stick or something to mix plaster with
Creative Paperclay®
Water
Rocks
Sanding paper

First start off with getting your materials in order. Cover your work area with a drop cloth (I have a board that I work on instead), gloves, your container for plaster, container for water, stirrer and empty drinking cup with rocks in it. When you have all of your materials together, measure out your plaster in one cup and measure your water in another cup. Whatever amount of plaster you'd like to use, you would need half of that amount to be water. For example 2 cups of plater would need to be mixed with 1 cup of water. 

Start sprinkling your plaster into your cup of water. It is important for you to sprinkle the plaster around the entire surface and not dump it into a pile in the middle. When you are done sprinkling, take your mixing tool and stir the mix until it is uniform and creamy. 

Take your small drinking cup and place it in the center of the mixing container. Fill the cup with rocks so that the plaster doesn't make it rise out of the container. Make sure you leave about an inch between the bottom of the cup and the base of the mixing cup so that the plaster fills under it. Let it sit to cure for about 48 hours.

Lightly tap the bottom and the sides of the container to release your pot.

Remove your cup . 

Start cleaning up some of the imperfections from the plaster. I use a combination of sanding and cutting with an exacto knife.

Brush down the area that you want to apply paperclay with water. Paperclay will not stick to a dry plaster surface, so you might need to continue applying water to the surface a couple of times until it begins to stick to it.

Work on the face in stages. I worked on the top part and set it aside to dry for around 24 hours.

After letting the piece dry, I came back to sand down some parts that I wanted to be smooth.

Repeat the last two steps as much as needed. Work up the piece and come back to sand things down for a smooth finish. 

Use a protective coating to seal your pot. I highly recommend you to water your plant outside of this pot and place it back after letting it drip dry first to prolong the life of the plaster.

Thank you all once again for stopping by, and I hope that you enjoyed today's tutorial! You can find Creative Paperclay® at the following retailers Creative Paperclay® Online Store, Michael's, Amazon, Joann's.

See more of my work at Melandolly.com, catch updates on 

my Instagram page and here is a link to my shop!

How to Create a Ring Holder

Hello everyone! My name is Cinnamon Willis and I am going to show you how I created this ring holder!

Supplies:

Creative Paperclay®

Plier

Wire

Masking Tape
Sanding paper

Protective varnish or clear coat covering

First start off with shaping your wire with the pliers to get your armature started. I worked with a wire that was about 24 inches long so that I could twist and shape my armature without having to add more wire. I shaped the head and the arm first and then worked my way down to the base. Make sure that your rings/earrings will be able to fit over the head and arm

I took the remaining wire and shaped it into a circle at the bottom of the figure that I created. Once I was happy with the shapes, I covered them with masking tape

Once you have completely covered the armature with masking tape, begin adding clay on top of the tape. When you have a good amount of clay on the figure, set the piece aside so that it could dry before adding another layer of clay.

This is the first layer of clay that has dried, it is ready for another layer to further define the shape of the piece.

I am working up the shape with another layer of clay. This is the stage that you want to try to narrow down the shape of your piece. 

I am happy with how he is turning out. I used crystal clear to give it a layer of protection.

I was able to put my rings and hoop earrings over the head!.

Thank you all once again for stopping by, and I hope that you enjoyed today's tutorial! You can find Creative Paperclay® at the following retailers Creative Paperclay® Online Store, Michael's, Amazon, Joann's.

See more of my work at Melandolly.com, catch updates on 

my Instagram page and here is a link to my shop!