How to Make a Paperclay Pumpkin

By Amanda Marks

Halloween is just around the corner meaning I need to start making some Halloween items.  I have been concentrating on Christmas that I completely forgot about my favorite time of year.  Since I am on the Paperclay Design Team and part of my job as a design team member is to experiment with new methods of using clay.  I decided to add paint to my clay and see how it would work.  I have done in the past a similar technique with porcelain clay and dry pigments but I had never tried it with liquid paint.  I was concerned that the paint would make the clay mushy and unusable but it did not.

Materials:
Creative Paperclay
Balloon
Pencil or Dowel
Fondant Roller (Rolling Pin)
Sculpting Tool
Acrylic Paint (I used PLAID Apple Barrel Apricot #20764*)
*I went with a lighter color because it is easier to make something darker than to lighten it up. 

1.  I took a piece of clay and flatten it out and added a little paint.  Taking the clay and kneading it to make the paint mix thoroughly throughout the clay.  This is a messy job your hands will be whatever color you decide to use.

2.  Once the clay is an even color you are ready to roll the clay out.  Using my fondant roller I rolled out an even piece of clay.

3.  Then wrap the clay around the balloon and smooth out the edges.

4.  Add lines with a sculpting tool.  Taking water smooth out the lines to make the lines more refined.  Once the pumpkin is to your liking sit it standing up (you may have to gently push on the pumpkin to flatten the bottom) and let dry for 8-12 hours (it has to be dry enough to pop the balloon and not have it collapse onto itself).

5.  Once dry to the touch pop the balloon and let the pumpkin dry.

6.  Sand the pumpkin to make it smooth.  Remember if you want your pumpkin more realistic you will not need a lot of sanding.  Brush with a soft bristle brush to dust the pumpkin to prepare it for painting.

 The stem was a lump of clay that I pushed onto the pumpkin and created lines with a sculpting tool.




I took a small piece of Paperclay and wrapped it around a sculpting tool and added the vines with a little water.

7.  Add the stem and vines to the top of the pumpkin (see above for step by step).  Let dry for 24 hours.

I painted the lines on the pumpkin with Orange Apple Barrel # 20561 to help give the illusion of depth.  I then too the Apricot that I used earlier and applied it over the orange.  Making the pumpkin look more natural.

 For the stem I took Hunter Green Apple Barrel #20754 as a base.  I dry brushed Fresh Foliage Folk Art #954 and some Raw Sienna on to the stem.


8.  Paint (see above for a step by step) and seal pumpkin with your favorite sealant.

Top of pumpkin

Side of Pumpkin

Other Side of Pumpkin

**Please note I did not purchase the Paperclay - I am on the Design Team and it was given to me.  All the other supplies I purchased.

Paperclay Owl Ornaments How To

by Amanda Marks

I decided that I wanted to make hollow ornaments this year (to sell and for family) I usually make flat ornaments.  I will say this tutorial is a little more advance that most of the ones I do, but with a little practice I promise you can make an ornament as well.  Also for this project I did Webcam shots touching my camera with clay hands is not advisable so this was the best hands free method I could think of.

Materials:
Un-Sharpened Pencil or Bamboo Skewer
Water Balloon with no water
Creative Paperclay
Spray Bottle
Sculpting Tools
Circle Cutters (1/2" and 1")
Fondant Roller (Rolling Pin)
Exacto Knife (to place the ornament in to dry)
Sand Paper
Old Piece of a Panty Hose
Dust Mask
Acrylic Paint
Ornament Hanger

1.  Blow up the balloon.  Since this is a water balloon you do need a good set of lungs to do this.  Tie the balloon to an un-sharpened pencil or bamboo skewer.

2.  Roll out Creative Paperclay using either a clay roller, fondant roller, or a rolling pin.  Spray Balloon with water, place Paperclay around the balloon merge seams together with water and sculpting tools.  Leaving the top opened so the balloon can be pulled out.

3.  Taking a 1" circle clay cutter or the top of a pill bottle (I used that because I couldn't find my 1" circle cutter.  Make an imprint on the left side of the owl and again on the right.  It is important that you do not push too hard (one you don't want to break the balloon or make a hole in the clay).  Taking the 1/2" circle cutter - I eyeball the small circle into the bigger circle.

4.  Taking a small piece of clay I formed a beak and attached the beak to the owl with some water.  Take two more small pieces of clay and make to equal cone shapes attach to the owl with a little water and sculpting tool.  These cones will be the horns for the owl.

5.  Rolling out another piece of clay cut two tear shaped pieces (these will be the wings).  Taking a sculpting tool make Xs across the top of the wing add a little water and place onto the owl, smooth with sculpting tool.

6.  Take another piece of clay cut out a moon shape and attach it to the backside of the owl.  Roll out a snake out of Paperclay and cut six equal pieces.  Use water to attach them to the underside of the owl (this will be the feet).
7.  Take a sculpting tool and refine all the edges of the eyes and add mouth to the beak.

8.  Allow to dry for 24 hours.  Pop the balloon.  Allow to dry for another 24 hours.

9.  Add the top of the head.  You may have to perform basic surgery on the owl with an Exacto knife to ensure proper smoothness of the Owl's head.  Add a piece of clay so you can add an ornament hanger.  Allow to dry for 24 hours.

10.  Now that your owl is dry let the fun begin with Dust Mask on.  It is now time to sand your owl - it is up to you how much or how little you

11.  Paint your owl with acrylic paint - I used PLAID Apple Barrel Paints and seal with a sealer.

I want to apologize for the lack of finished photos - we had a bad storm and our internet has been out for a couple of days.  I published what I had.